化工制药生产对搅拌设备有严苛要求。我们专为研发了采用防爆与防腐设计，适应复杂介质与恶劣环境。电机具备精准的转速控制与高启动力矩，确保混合、反应过程的均匀与高效，保障生产安全与工艺一致性。针对不同粘度和腐蚀性的物料，我们提供稳定可靠的动力解决方案，助力企业提升产品质量与运营效率。
化工制药搅拌
化工制药搅拌
Key Features
Technical Specifications
Electrical Characteristics
Mechanical Structure
Operating Parameters
Environmental & Certification
Successful Stories
Motor Selection Guide and FAQ
Motor Selection Guide
1. Define Basic Parameters
Power & Speed:
Determine the required rated power based on load characteristics and define the motor pole count and speed range according to your equipment’s operational speed.
Voltage & Frequency:
Confirm your power supply standard (e.g., 380V/50Hz, 480V/60Hz). Custom designs are available for special voltage requirements.
Mounting Type:
Specify IEC standard mounting (e.g., B3, B5, B14). Custom the flanges & bases are also supported.
2. Consider Operating Environment
Protection Rating (IP):
IP55 for standard environments. IP65 is recommended for damp or dusty conditions. Hazardous areas require Ex D/Ex E certifications.
Insulation Class:
Class F (155°C) for general use. Class H (180°C) insulation is advised for high-temperature environments.
Cooling Method:
Self-ventilated (IC411) for standard applications. Forced air or water cooling is available for enclosed spaces or high-power-density scenarios.
3. Match Load Characteristics
Starting Torque:
Consider starting torque for fan/pump loads. Verify locked-rotor torque for conveying equipment.
Duty Cycle:
Standard motors are suitable for continuous operation (S1). Frequent start-stop cycles (S5) require reinforced bearings and insulation.
Efficiency Requirement:
Select IE3/IE4/IE5 efficiency classes based on annual operating hours. Ultra-premium efficiency (IE5) motors offer the lowest total cost of ownership for long-running applications.
Get Your Custom Solution & Fast Quote. Our Engineers Are Ready to Help.
Contact Us for the Precise Solution
Provide your equipment parameters, load profile, environmental conditions, and application details.
Receive the complimentary motor selection calculation, the energy efficiency analysis report, and the 3D model.
We support sample testing and operational simulation for validation.
