注塑与橡胶机械需要电机具体有高负荷、高精度的成型工艺设计，高启动力矩与连续抗冲击能力，确保开合模、螺杆驱动的精确与稳定。在高温与频繁启停的严苛工况下，电机依然保持高效运行。我们提供从普通驱动到伺服节能系统的全面解决方案，帮助提升制品质量与生产效率，助力您显著降低能耗与运营成本。
注塑与橡胶机械
注塑与橡胶机械
Key Features
Technical Specifications
Electrical Characteristics
Mechanical Structure
Operating Parameters
Environmental & Certification
Successful Stories
Motor Selection Guide and FAQ
Motor Selection Guide
1. Define Basic Parameters
Power & Speed:
Determine the required rated power based on load characteristics and define the motor pole count and speed range according to your equipment’s operational speed.
Voltage & Frequency:
Confirm your power supply standard (e.g., 380V/50Hz, 480V/60Hz). Custom designs are available for special voltage requirements.
Mounting Type:
Specify IEC standard mounting (e.g., B3, B5, B14). Custom the flanges & bases are also supported.
2. Consider Operating Environment
Protection Rating (IP):
IP55 for standard environments. IP65 is recommended for damp or dusty conditions. Hazardous areas require Ex D/Ex E certifications.
Insulation Class:
Class F (155°C) for general use. Class H (180°C) insulation is advised for high-temperature environments.
Cooling Method:
Self-ventilated (IC411) for standard applications. Forced air or water cooling is available for enclosed spaces or high-power-density scenarios.
3. Match Load Characteristics
Starting Torque:
Consider starting torque for fan/pump loads. Verify locked-rotor torque for conveying equipment.
Duty Cycle:
Standard motors are suitable for continuous operation (S1). Frequent start-stop cycles (S5) require reinforced bearings and insulation.
Efficiency Requirement:
Select IE3/IE4/IE5 efficiency classes based on annual operating hours. Ultra-premium efficiency (IE5) motors offer the lowest total cost of ownership for long-running applications.
Get Your Custom Solution & Fast Quote. Our Engineers Are Ready to Help.
Contact Us for the Precise Solution
Provide your equipment parameters, load profile, environmental conditions, and application details.
Receive the complimentary motor selection calculation, the energy efficiency analysis report, and the 3D model.
We support sample testing and operational simulation for validation.
