我们的电机以高效设计与精密制造为初心，在供水、排水及各种立体输送场景中，直面潮湿、连续运转等严苛工况，以其出色的防护性能与能效表现，帮助系统降低能耗、减少维护，保障和提高了整个系统长时间连续作业的可靠性
水泵
水泵
Key Features
Technical Specifications
Electrical Characteristics
Mechanical Structure
Operating Parameters
Environmental & Certification
Successful Stories
Motor Selection Guide and FAQ
Motor Selection Guide
1. Define Basic Parameters
Power & Speed:
Determine the required rated power based on load characteristics and define the motor pole count and speed range according to your equipment’s operational speed.
Voltage & Frequency:
Confirm your power supply standard (e.g., 380V/50Hz, 480V/60Hz). Custom designs are available for special voltage requirements.
Mounting Type:
Specify IEC standard mounting (e.g., B3, B5, B14). Custom the flanges & bases are also supported.
2. Consider Operating Environment
Protection Rating (IP):
IP55 for standard environments. IP65 is recommended for damp or dusty conditions. Hazardous areas require Ex D/Ex E certifications.
Insulation Class:
Class F (155°C) for general use. Class H (180°C) insulation is advised for high-temperature environments.
Cooling Method:
Self-ventilated (IC411) for standard applications. Forced air or water cooling is available for enclosed spaces or high-power-density scenarios.
3. Match Load Characteristics
Starting Torque:
Consider starting torque for fan/pump loads. Verify locked-rotor torque for conveying equipment.
Duty Cycle:
Standard motors are suitable for continuous operation (S1). Frequent start-stop cycles (S5) require reinforced bearings and insulation.
Efficiency Requirement:
Select IE3/IE4/IE5 efficiency classes based on annual operating hours. Ultra-premium efficiency (IE5) motors offer the lowest total cost of ownership for long-running applications.
Get Your Custom Solution & Fast Quote. Our Engineers Are Ready to Help.
Contact Us for the Precise Solution
Provide your equipment parameters, load profile, environmental conditions, and application details.
Receive the complimentary motor selection calculation, the energy efficiency analysis report, and the 3D model.
We support sample testing and operational simulation for validation.
